Features - RIDGID AUTOSHIFT R86014 Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS
Chuck .........................................................../ in. Keyless
Motor .................................................................. 8 Volt DC
Switch ..........................................................Variable Speed
KEYLESS
CHUCK
KNOW YOUR DRILL
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AutoShift
™
When you select AutoShift
shift to low speed when it senses more torque is required
for the application.
BIT STORAGE
Bits provided with the drill can be placed in the storage area,
located on the base of the drill.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/center
lock) selector located above the switch trigger for changing
HIGH/LOW SPEED
INDICATORS
TORQUE
ADJUSTMENT RING
SWITCH
TRIGGER
LED
LIGHT
, your drill will automatically
™
No Load Speed ....................... 0-450/0-,450 r/min. (RPM)
Clutch ................................................................ 4 Position
Torque ................................................................... 450 in.lb.
BIT
STORAGE
the direction of bit rotation. Setting the direction of rotation
selector in the OFF (center lock) position will lock the switch
trigger to help reduce the possibility of accidental starting
when not in use.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
LED LIGHT
The LED light located on the front of the tool base illuminates
when the switch trigger is depressed.
TORQUE ADJUSTMENT RING
Your drill has a 4-position clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
7
AutoShift™
SELECTOR
DIRECTION OF ROTATION
SELECTOR (FORWARD/REVERSE/
CENTER LOCK)
REVERSE
FORWARD
Fig.