Sending Scan Files To The Ftp Server - Ricoh Aficio 106/LD215c Function Manual

Note
❒ If authentication is required to access the folder, the login screen appears.
Enter the user name and password.
❒ If you change the protocol after entering the path name, user name, or pass-
word, a confirmation message appears.
❒ If you press [Cancel] while browsing the network, the Path Entry Method
screen reappears.
❒ Computer and shared folder names containing more than 12 characters
cannot be displayed.
❒ Up to 100 computers and shared folders can be displayed as search results.
❒ The machine may fail to transfer the file if you do not have write privileges
for the shared folder or there is not enough free hard disk space.
❒ You can register the destination path in the machine's address book. For
details, see "Registering Manually-Entered E-mail Address to Address
Book".
Reference
p.26 "Registering Manually-Entered E-mail Address to Address Book"

Sending Scan Files to the FTP Server

This section explains how to specify destinations when sending files to an FTP
server.
Directly enter the path for the folder on the FTP Server
You can enter the path to an FTP server manually.
A
Press [Dest.:].
B
Select [FTP], and then press {OK}.
Specifying a Destination Folder
2
59