Ricoh Type 2500 Printer Reference page 60

Preparing the Machine
B
Click the icon of the printer you want to use.
C
On the [File] menu, click [Properties].
D
Click the [Change Accessories] tab.
1
If options in the [Change Accessories] tab are disabled, bidirectional connection
is enabled. In this case, no change is necessary for option settings.
If you are using the RPCS printer driver, click the [Change Accessories] tab.
E
Select options installed from the options area, and then make the necessary
settings.
F
Select the total amount of the memory in [Total memory:] when the optional
SDRAM module is added.
G
Under [Paper source tray settings:], click and highlight the tray to be used, and
then select the appropriate size, position, and type for the tray. Select the
[Do not use Auto Tray Select] check box to exclude the tray from the targets of
automatic tray selection.
H
Click [OK] to close the printer properties dialog box.
54