Cisco UC 320W Administration Manual page 39

Installing the UC 320W and Phones
Connecting Wired and Wireless Headsets (Optional)
Unified Communications UC 320W Administration Guide
Task
Creating a profile for
your Bluetooth headset
Cisco SPA 525 models
Instructions
Available on Cisco SPA 525 models only
1. After enabling Bluetooth, press the Setup
button.
2. Scroll to User Preferences and press Select.
3. Scroll to Bluetooth Configuration and press
Select.
4. Scroll to Bluetooth Mode and press the Right
Arrow key to choose one of the following:
• Phone: Your Cisco SPA 525G2 will pair with
a Bluetooth headset only. Choose this option
if you will not use the Cisco SPA 525G2 with
a Bluetooth-enabled mobile phone.
• Both: Your Cisco SPA 525G2 can use a
Bluetooth headset, or operate with your
Bluetooth-enabled mobile phone. At any
time, a connection can be made to either the
Bluetooth headset or the Bluetooth-enabled
mobile phone. If multiple Bluetooth devices
are in range, the device with a higher priority
is activated first, based on the order of
devices in the Bluetooth Configuration >
Bluetooth Profiles list.
5. Scroll to Bluetooth Profiles and press the Right
Arrow key to enter the profile screen.
6. Press Scan to scan for your headset. If the
device is not detected, ensure the headset is
powered on and has Bluetooth activated, and
retry the scan.
7. In the list of found devices, select your headset
and press the Select button to edit the profile.
8. Scroll to PIN and enter the PIN for your Bluetooth
headset.
9. Scroll to Connect Automatically and press the
Right Arrow key to turn to On.
10. Press Connect.
1
39