Cisco UC 320W Administration Manual page 17

Installing the Unified Communications System
Connecting the Equipment
STEP 5
Unified Communications UC 320W Administration Guide
Connect the devices to power in the following order:
a. Broadband network device (if applicable)
b. Secure router (if applicable)
c. Cisco UC 320W
d. Ethernet switch (if applicable)
e. IP phones (if not using PoE)
f. Other devices
UC 320W
The system will begin updating phone and gateway firmware and the basic
configuration. You may see them reboot several times. This is normal.
Congratulations! You have connected the equipment for your Unified
Communications system.
1
17