Copying
Size Magnification
This function calculates an enlargement or reduction ratio based on the lengths
of the original and copy.
2
Measure and specify the lengths of the original and copy by comparing "A" with
"a".
A
Press [Reduce / Enlarge].
B
Press [Size Magnification].
C
Enter the length of the original with the number keys, and then press {q}
key.
You can enter sizes between 1 to 999 mm in 1 mm steps.
D
Enter the length of the copy with the number keys, and then press {q} key.
E
Press [OK] twice.
F
Place the originals, and then press the {Start} key.
Note
❒ To change the length after pressing {q} key in step
[Copy], and then enter the desired length.
68
D
, select [Original] or