Maintenance; Specifications; Statement Of Conformity - Greenlee CLM-1000 Instruction Manual

1.800.561.8187
Accuracy (cont'd)
Resistance
Range Accuracy
199.99 mΩ ± (1% + 0.05 mΩ)
1.9999 Ω ± (1% + 0.5 mΩ)
19.999 Ω ± (1% + 5 mΩ)
199.99 Ω ± (1% + 50 mΩ)
1999.9 Ω ± (1% + 0.5 mΩ)
Temperature: ±1.5 °C

Specifications

Display: LCD, 4-1/2 digits 20,000 counts
Operating Conditions: 32 °F to 104 °F (0 °C to 40 °C),
relative humidity < 75%
Storage Conditions: -4 °F to 140 °F (-20 °C to 60 °C),
relative humidity < 85%
Battery: Six 1.5 V batteries (AA, NEDA 15A, IEC LR6)
Dimensions: 198 mm x 98 mm x 56 mm
(7.8" x 3.9" x 2.2")
Current Consumption:
Backlight OFF and no cable is being
measured: Approximately 5 mA
When a cable is being measured:
Approximately 100 mA
APO Timing: Idle for 10 minutes
Low Battery Indicator: Approximately 7.2 V

Statement of Conformity

Greenlee Textron Inc. is certified in accordance with
ISO 9001 (2000) for our Quality Management Systems.
The instrument enclosed has been checked and/or cali-
brated using equipment that is traceable to the National
Institute for Standards and Technology (NIST).
www.
CLM-1000 • CLM-1000E

Maintenance

Electric shock hazard:
Before opening the case, remove the test leads from the
circuit and shut off the unit.
Failure to observe this warning could result in severe
injury or death.
Replacing the Batteries
1. Turn the unit OFF. Remove the Kelvin clip leads from
the meter.
2. Remove one screw from the battery access door and
remove it.
3. Replace the batteries, making sure to observe the
polarity.
4. Replace cover and continue with normal operation.
Cleaning and Storage
Periodically wipe the case with a damp cloth and mild
detergent; do not use abrasives or solvents.
If the meter will not be used for periods longer than
60 days, remove the batteries and store them separately.
9
information@itm.com
.com