Yamaha Aerox GDR155 Owner's Manual page 45

This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "km/L" or "L/100
km".
 "km/L": The average distance that
can be traveled on 1.0 L of fuel is
shown.
 "L/100 km": The average amount
of fuel necessary to travel 100 km
is shown.
To switch between the average fuel
consumption display settings, push
the "RESET/SELECT" button for one
second.
To reset the average fuel consumption,
push the "RESET/SELECT" button for
at least one second.
TIP
After resetting the average fuel con-
sumption, "_ _._" will be shown until
the vehicle has traveled 0.1 km (0.06
mi).
The battery voltage indicator
This indicator shows the current
charge state of the battery.
 Over 12.8 V Full charge
Instrument and control functions
 Under 12.7 V Charging is required.
TIP
If the battery voltage is less than 9.0 V,
"_ _._" will be displayed.
Self-diagnosis mode
1
1. Error code display
This model is equipped with a self-di-
agnosis device for various electrical
circuits.
If a problem is detected in any of those
circuits, the engine trouble warning
light will come on and the display will
indicate an error code.
If the display indicates any error codes,
note the code number and have a
Yamaha dealer check the vehicle.
6-9
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
ECA11591
6