Yamaha Aerox GDR155 Owner's Manual page 92

Periodic maintenance and adjustment
(GDR155-A)
2
12
1
1. Main fuse
2. Spare fuse
3. Fuel injection system fuse
4. Backup fuse
5. Ignition fuse
6. Headlight fuse
7. Signaling system fuse
8. ABS solenoid fuse
9. ABS motor fuse
10.ABS control unit fuse
11.Smart key system fuse
9
12.Terminal fuse 1 (for auxiliary DC jack)
If a fuse is blown, replace it as follows.
1. Turn off the electrical circuit in
question, and then turn off the
main switch.
2. Open the seat. (See page 6-15.)
3. Remove the battery cover by re-
moving the screws.
3
4
7
5
6
8
9
10
11
1. Battery cover
2. Screw
4. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
2
1
2
[EWA15132]
9-29
Specified fuses:
Main fuse:
30.0 A
Terminal fuse 1:
2.0 A
Headlight fuse:
7.5 A
Signaling system fuse:
7.5 A
Ignition fuse:
7.5 A
Smart key system fuse:
2.0 A (GDR155-A)
ABS motor fuse:
10.0 A (GDR155-A)
Fuel injection system fuse:
7.5 A
ABS solenoid fuse:
7.5 A (GDR155-A)
ABS control unit fuse:
2.0 A (GDR155-A)
Backup fuse:
7.5 A
5. Turn the main switch on, and then
turn on the electrical circuit in
question to check if the device op-
erates.