Ricoh Aficio IS 2325 Operating & Troubleshooting Instructions page 26

Troubleshooting When Using the Copy Function
Problem
Copies are not stapled.
Copies are not stapled.
Staples are wrongly positioned. Originals are not set correctly. Check the correct position to
2
Print is slanted.
Print is slanted.
Print is slanted.
❖ Edit
Problem
When using the Duplex Mar-
gin function, parts of the orig-
inal image are not copied.
When using the Duplex Mar-
gin function, parts of the orig-
inal image are not copied.
❖ Combine
Problem
When using Combine, parts of
the image are not copied.
When using Combine, parts of
the image are not copied.
Copies are not in correct order. You placed the originals in the
18
Causes
The number of copies exceeds
the capacity of the stapler.
Copy paper is curled.
The paper is feeding in at a
slant.
The machine's cover is open.
The side fences in the paper
tray is not locked.
Causes
You set a wide erased margin. Set a narrower margin with User
There is a lack of margin space
on the opposite side of the
binding position.
Causes
You specified a reproduction
ratio that does not match the
sizes of your originals and
copy paper.
Your originals are not identi-
cal in size and direction.
incorrect order.
Solutions
Check the stapler capacity.
See "Supplementary Informa-
tion", Copy Reference.
Turn the copy paper over in
the tray.
place the originals. See "Sta-
ple", Copy Reference.
Load the paper correctly. See
p.87 "Loading Paper".
Make sure the right and lower
right covers are properly
closed.
Make sure the side fence is
locked. See p.92 "Changing
the Paper Size".
Solutions
Tools. You can set the width be-
tween 0-50 mm (0"-2"). See "Copier
Features", General Settings Guide.
Set a narrower margin with User
Tools. You can set the width be-
tween 0-50 mm (0"-2"). See "Copier
Features", General Settings Guide.
Solutions
When you specify a reproduc-
tion ratio using the Manual
Paper Select function, make
sure the ratio matches your
originals and the copy paper.
Select the correct reproduction ratio
before using the Combine function.
Use originals that are identical
in size and direction.
When placing a stack of origi-
nals in the ARDF, the last page
should be on the bottom.
If you place an original on the
exposure glass, start with the
first page to be copied.