Install Eyeball Dome Camera; What's Included; Install Camera - Uniden 4KTPD-MVF Installation Manual

7. Adjust the collar to swivel the camera up to 175˚ on a horizontal
axis (orients the camera for top/bottom of frame).
As you adjust the camera position, check it through the
8. Insert an SD card if needed.
9. Remove the dessicant packet from the sealed plastic envelope
and position it inside the camera.
10. Align the tab on the housing with the slot on the camera base
for easier reassembly. Tighten screws.

INSTALL EYEBALL DOME CAMERA

What's Included

• IP camera
• Mounting template sticker
• Star-tipped Allen wrench
• 2-wire to 2.1mm barrell plug for optional 12V DC power input
• Installation screws and anchors
• Dessicant package

Install Camera

1. Remove the camera and installation items from the box. Verify that all parts are there.
2. Hold the camera and sleeve steady and unscrew the ring from
the base.
3. Position the installation template sticker on the location (wall, ceiling, etc). Drill a 1" hole as
indicated on the sticker. Install the anchors.
4. Position the base on the template, aligning the screw holes to the anchors, and screw it into
position.
NVR Preview screen.
Adjustable
collar
Thumb
Control
Reset Button
SD Card Slot
Base
Ring
Sleeve
Camera
9