Install Mini Dome Camera; What's Included; Install Camera - Uniden 4KTPD-MVF Installation Manual

12. Remove the dessicant packet from the sealed plastic envelope
and position it inside the camera.
13. Screw the housing back onto the camera base.

INSTALL MINI DOME CAMERA

What's Included

• IP camera
• Mounting template sticker
• Star-tipped Allen wrench
• 2-wire to 2.1mm barrell plug for optional 12V DC power input
• Installation screws and anchors
• Dessicant package

Install Camera

1. Remove the camera and accessory items from the box. Verify that all parts are there.
2. Position the installation template sticker on the location (wall, ceiling, etc). Drill a 1" hole as
indicated on the sticker and install anchors and screws.
3. Unscrew the camera from the housing, allowing the camera to
separate from the housing and clear dome.
4. Connect the camera's network cable tail to the house cabling
through the 1" hole.
When using an optional external power supply, the AC
socket outlet shall be installed near the equipment and be
If installed outdoors, the cable and all cable connections
must be routed inside the wall.
5. Align the camera base screw holes to the screws. Hang the
base onto the screws then slide the base along the screw lock
to secure.
6. Remove the protective films from the inside and outside of the camera dome and clean the
dome with a microfiber cloth (not included) if available.
Do not use a paper towel to clean the camera lens or dome as it might leave
8
easily accessible.
scratches.
Red - 12VDC (optional)
2.1mm Barrel Adapter
NOTE: 12VDC power supply
not included
RJ45
Screw Hole
and Lock
PoE