Host Interface - Ricoh 1350 Printer Reference

Bypass Tray Setting Priority
Edge to Edge Print
Default Printer Language
Tray Switching

❖ Host Interface

I/O Buffer
I/O Timeout
❖ PCL Menu
Orientation
Form Lines
Font Source
Font Number
Point Size
Font Pitch
Symbol Set
Courier Font
Extend A4 Width
Append CR to LF
Resolution
Menu
Menu
Menu
Description
You can specify which of the two options,
(Printer) Driver / Command or Machine Set-
tings, has priority for determining the paper
size for Multi Bypass Tray (Tray 7).
This option is used only when Multi Bypass
Tray (Tray 7) is installed.
You can select whether or not to print on the
entire sheet.
You can set the default printer language if
the machine cannot find the printer language
automatically.
You can set to switch the paper tray.
Description
You can set the size of the I/O Buffer. Nor-
mally it is not necessary to change this setting.
You can set how many seconds the machine
should wait before ending a print job. If data
from another port usually arrives in the mid-
dle of a print job, you should increase this
timeout period.
Description
You can set the page orientation.
You can set the number of lines per page.
You can set the storage location of the de-
fault font.
You can set the ID of the default font you
want to use.
You can set the point size you want to use for
the selected font.
You can set the number of characters per
inch for the selected font.
You can specify the set of print characters for
the selected font. The available options are as
follows:
You can select a courier font type.
You can extend the printing area width
when printing on A4 sheet with PCL.
When set to On, a carriage return will follow
each line feed: CR=CR, LF=CR−LF, FF=CR−FF.
You can set the print resolution in dots per
inch.
11