Receiving Calls; Storing Numbers - BellSouth MH9002 Owner's Manual

Basic Operation
Receiving Calls with the HANDSET on the BASE UNIT
1. When the phone rings, lift the HANDSET .
The IN USE LED indicator will light up.
2. Start your conversation.
3. To end your conversation, either press the
button or place the HANDSET on
the BASE UNIT. If you place the HANDSET
on the BASE UNIT CHARGE CRADLE, you
activate the automatic STANDBY feature.
Receiving Calls with the HANDSET off the BASE UNIT
1. When the phone rings, press the
2. Start your conversation.
3. To end your conversation, either press the
UNIT. If you place the HANDSET on the BASE UNIT CHARGE CRADLE, you activate the
automatic STANDBY feature.

Storing Numbers

1. Be sure the BASE UNIT IN USE LED
indicator is off and the HANDSET is in
STANDBY mode (See Special Features
Section).
2. Press the MEMO button.
3. Dial the number you want to store.
4. Press the MEMO button again.
5. Dial the TELEPHONE KEYPAD
9
button where you want to store that
number. You will hear one confirmation
"beep."
6. Repeat steps 1 through 5 to store other
telephone numbers.
REDIAL
button. The IN USE LED indicator will light up.
button or place the HANDSET on the BASE
0
~
2, 4
8
SCAN
TALK
R E D I A L SCAN
TALK
2