Table of Contents
Advertisement
HS-360X Wireless Scanner Beeper and LED
Event
Battery Indications
Low battery indication (on trigger
release)
Battery LED status
Battery end of life
Parameter Programming
Input error, incorrect barcode or
Cancel scanned, wrong entry,
incorrect barcode programming
sequence; remain in program
mode.
Keyboard parameter selected.
Enter value using barcode keypad.
Successful program exit with
change in the parameter setting.
Cancel rule entry. Rule entry mode
exited because of an error or the
user asked to exit rule entry.
Host-Specific: USB-Only
Scanner has not completed
initialization. Wait several seconds
and scan again.
Host-Specific: RS-232-Only
RS-232 receive error.
A <BEL> character is received
when Beep on <BEL> is enabled
(Point-to-Point mode only).
2-4
Beeper Sequence
Four short high beeps
Long low/long high beeps
High/low beeps
High/low/high/low beeps
Long low/long high/long low beeps
Four high beeps
High/high/high/low beeps
High beep
HS-360X Handheld DPM Scanner User Manual
LED
Red (stays on)
99-51% Green
21-50% Amber
0-20% Red
99-51% Green/red alternating
21-50% Amber/red alternating
0-20% Red blinking
Red
Green
Green
Green
(turns off blinking)
None
Red
None
Advertisement
Table of Contents
