Table of Contents
Advertisement
Symbologies
User-Programmable Supplementals
Supplemental 1: Parameter # 579
Supplemental 2: Parameter # 580
If you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN
Supplementals, select User-Programmable Supplemental 1 to set the 3-digit prefix.
Select User-Programmable
Then select the 3 digits using the numeric programming
symbols.
Supplemental 2 to set a second 3-digit prefix. Then select the 3 digits using the numeric
programming symbols
.
The default is 000 (zeroes).
User-Programmable Supplemental 1
User-Programmable Supplemental 2
9-19
HS-360X Handheld DPM Scanner User Manual
Advertisement
Table of Contents
