Technical Specifications - ResMed Positive AirwAy Pressure Device S8 Elite II User Manual

Problem/Possible Cause
The following message is displayed on the LCD after you try to update settings
or copy data to the Data Card:
The identification details on the
Data Card do not match the
identification details on your device.

Technical Specifications

.
Operating pressure range
Dimensions (H x W x D)
Weight
Operating Temperature
Power Supply
Operating Humidity
Storage and Transport
Temperature
Storage and Transport
Humidity
Operating Altitude
Electromagnetic
Compatibility
Air Filter
Air Tubing
Air Outlet
IEC 60601-1 Classifications
Housing Construction
DECLARED DUAL-NUMBER NOISE EMISSION VALUES in accordance with ISO 4871:
Sound Pressure Level
Sound Power Level
Supplemental Oxygen
The manufacturer reserves the right to change these specifications without notice.
14
Solution
Settings Invalid Remove Card
Contact your clinician immediately.
4 to 20 cm H O
2
112 mm x 164 mm x 145 mm
1.4 kg
+5°C to +36°C
•
Input range for S8 Series II with H4i:100–240V, 50/60Hz; 110V,
400Hz; 2.5A < 140VA (110W) (maximum power consumption).
Instantaneous peak power consumption <340VA.
•
Refer to the DC-12 converter instructions for DC ratings. Only
use the ResMed DC-12 converter for DC input.
• Typical power consumption at 20 cm H
10%–95% non-condensing
-20ºC to +60ºC
10%–95% non-condensing
Sea level to 2,591 m
Product complies with all applicable electromagnetic compatibility
requirements (EMC) according to IEC60601-1-2, for residential,
commercial, and light industry environments.
The electromagnetic compatibility tables for these ResMed devices
can be found on www.resmed.com, on the Products page under
Service & Support. Click on the PDF file for your device.
Two-layered, powder-bonded, polyester non-woven fiber
Flexible plastic, 2 m
The 22 mm conical outlet complies with EN 1281-1
Class II (double insulation), Type CF
Flame retardant engineering thermoplastic
24 dBA with uncertainty of 2 dBA as measured according to
ISO 17510-1: 2002
26 dBA with uncertainty of 2 dBA as measured according to
ISO 17510-1: 2007
34 dBA with uncertainty of 2 dBA as measured according to
ISO 17510-1: 2007
Recommended maximum supplemental oxygen flow: 4 L/min
0 is 39VA or 20.7W.
2