Configure The Auxiliary Line - Cisco 4451 ISR Hardware Installation Manual

Perform Initial Configuration on Cisco 4000 Series ISRs

Configure the Auxiliary Line

This section describes how to enter line configuration mode for the auxiliary line. How you configure
the auxiliary line depends on your particular implementation of the auxiliary (AUX) port. See the
following documents for information on configuring the auxiliary line:
•
•
•
•
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
line aux 0
Example:
Router(config)# line aux 0
Step 4
See the Technical Specifications Note and sample
configurations to configure the line for your particular
implementation of the AUX port.
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
4-18
Configuring a Modem on the AUX Port for EXEC Dialin Connectivity, Technical Specifications Note
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml
Configuring Dialout Using a Modem on the AUX Port, sample configuration
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080094
579.shtml
Configuring AUX-to-AUX Port Async Backup with Dialer Watch, sample configuration
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093
d2b.shtml
Modem-Router Connection Guide, Technical Specifications Note
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a008009428b.shtml
enable
configure terminal
line aux 0
See the Technical Specifications Note and sample configurations to configure the line for your
particular implementation of the AUX port.
Chapter 4 Configure Initial Router Settings on Cisco 4000 Series ISRs
Purpose
Enables privileged EXEC mode.
•
Enter your password if prompted.
Enters global configuration mode.
Starts the line configuration command collection mode for
the auxiliary line.
—
OL-32185-02