Connect Power - Cisco 4451 ISR Hardware Installation Manual

Connect Power

Figure 3-13
Step 4
Connect the other end of the ground wire to a known reliable earth ground point at your site.

Connect Power

This section explains how to connect AC power to the router.
Warning Read the installation instructions before connecting the system to the power source. Statement
1004
This unit might have more than one power supply connection. All connections must be removed
Warning
to de-energize the unit. Statement 1028
Only trained and qualified personnel should be allowed to install, replace, or service
Warning
this equipment. Statement 1030
Note
The installation must comply with all required electrical codes applicable at the installation site.
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
3-20
Chassis Ground Connection on the Router (Cisco 4451-X ISR shown) Chassis
Chapter 3 Install and Connect Cisco 4000 Series ISRs
OL-32185-02