Overview Of The Nim-Hdd Card - Cisco 4451 ISR Hardware Installation Manual

Chapter 6 Install and Upgrade Internal Modules and FRUs
Figure 6-13
To insert or remove the NIM-SSD into any router NIM slot, see
Cisco NIM-SSD or NIM-HDD"

Overview of the NIM-HDD Card

The NIM-HDD is a network interface module that is used to support hard disk drive (HDD) connection
for Cisco 4400 Series ISR and Cisco 4300 ISR.
The NIM-HDD module has the following features:
•
•
•
•
•
•
Note
A drive is removable or insertable when the power is running on the SSD/HDD connector.
OL-32185-02
Side View of the NIM-SSD
Provides 1 TB of memory.
The NIM form-factor supports and houses a single field replaceable 15 mm HDD or two SSDs.
On-board PCIe dual channel SATA controller enabling the NIM-HDD in any NIM slot of the router
(Controller Mode)
Support for SATA pass-through mode
Support for module level OIR operation
Support for hot plug of SSD/HDDs
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
section in this chapter.
Overview of the NIM-HDD Card
the"Remove and Replace
6-19