Example Of Attaching The Washer Nozzle; Fixing The Drop-Prevention Wire - Panasonic AW-HR140PJ Operating Instructions Manual

How to install and connect the unit (continued)

Example of attaching the washer nozzle

Diameter of nozzle that can be attached: ø 16 mm (ø 5/8 inches)
Washer nozzle mount bracket
(supplied accessory)
Fixing the washer nozzle mount bracket
Camera front
Unit mounting
screw x4 (procure
separately)
Washer nozzle mount bracket
(supplied accessory)
<NOTE>
• Attach the washer nozzle mount bracket to the side of the camera.
• Perform an installation operation check and then adjust the orientation
of the washer nozzle and check that water flows onto the front glass.
• To control the washer, connect pin number 2 and pin number 3 of the
EXT connector (→ page 36) to the washer unit and then perform
control from the camera menu or controller.
• The washer fluid is not sprayed until the washer hose is filled with
washer fluid.
• If the limiter is set more inward than the position to be washed with the
washer fluid, the washer will not operate.
• To use the washer function, set [Washer] to [Yes] in the OSD or web
screen.
The camera head will move to the position of the washer nozzle,
washer fluid will be sprayed for a specific duration, and the camera
head will return to the original position.
The wiper also operates momentarily during cleaning.
• The washer position changes depending on whether the installation
method is stand-alone or suspended.
Before installing the unit, verify that the camera head moves to the
washer nozzle position and confirm that the washer function operates
properly.
For details, consult your dealer.
Fix the drop-prevention wire to a part of the main structure of the
building or a part that is sufficiently strong (minimum withdrawal strength
of 1764 N {180 kgf} or more).
Separately procure M6 mounting bolts suitable for the material of the
installation location.
Drop-prevention wire
mounting screw (with
hexagonal socket, for unit)
(supplied accessory)
Drop-prevention wire
mounting bolt (M6)
(procure separately)
Washer nozzle
Washer hose
(procure separately)

Fixing the drop-prevention wire

<IMPORTANT>
• Attach the drop-prevention wire so the unit will not hit anybody
nearby in the event that it becomes detached.
Installation Instructions
Drop-prevention wire
(supplied accessory)
9