Samsung SCX-1100 Service Manual page 15

Disassembly and Reassembly
3-5 SMPS
1. Before you remove the SMPS, you should remove:
• Scanner Ass'y
• Rear Cover
2. Unplug the one connector from the main PBA.
3-6 Engine Ass'y
1. Before you remove the engine ass'y you should
remove:
• Scanner Ass'y
• Rear Cover
2. Unplug the SMPS connector and cover open sensor
connector from the main PBA.
3-6
(see page 3-1)
(see page 3-5)
(see page 3-1)
(see page 3-5)
3. Pushing down the hooks on both ends, pullout the
SMPS.
3. Remove the three screws securing the engine ass'y
and remove it.
samsung Electronics