Alcatel-Lucent 7710 SR OS Interface Configuration Manual page 395

Parameters
vpi — Displays the VPI values.
vci: — Displays the VCI values.
detail — Provides detailed information.
Output Show Mutlilink-Bundle IMA ATM PVC Output — The following table describes show
multilink-bundle IMA ATM port-connection output fields.
Mutlilink-Bundle IMA ATM PVC Output Fields
Sample Output
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm pvc
================================================================
ATM PVCs, Port bundle-ima-1/1.1
================================================================
VPI/VCI
----------------------------------------------------------------
1/100
================================================================
A:NS052651098#
7710 SR OS Interface Configuration Guide
Values
vpi: 0 — 4095 (NNI)
0 — 255 (UNI)
Values 1, 2, 5 — 65534
MDA Values
1, 2
Label
VPI/VCI
Owner
Type
Ing.TD
Egr.TD
Adm
Opr
OAM
Owner Type
SAP PVC
Displays the VPI/VCI value.
Specifies the type of this multilink bundle.
mlppp — Indicates that the bundle is of type MLPPP.
ima — Indicates that the bundle is of type IMA group.
Identifies the system entity that owns a specific ATM connection.
Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Specifies the ATM traffic descriptor profile that applies to the transmit
direction of the interface connection.
ima — Indicates that the bundle is of type IMA group.
Down — The bundle is administratively down.
Up — The bundle is operationally up.
Down — The bundle is operationally down.
Indicates the OAM operational status of ATM connections.
Ing.TD Egr.TD Adm
2 2 up
Interface Configuration
Description
OAM Opr
up up
Page 395