Alcatel-Lucent 7710 SR OS Interface Configuration Manual page 333

==========================================================================
A:7710-3#
pools
Syntax pools mda-id [/port] [access-app [pool-name | service service-id]]
pools mda-id [/port] [network-app [[pool-name]]
Context show
Description
This command displays pool information.
Parameters mda-id[/port] — Displays the pool information of the specified MDA.
access-app pool-name — Displays the pool information of the specified QoS policy.
service service-id — Displays pool information for the specified service.
queue-group queue-group-name — Display information for the specified queue group.
direction — Specifies to display information for the ingress or egress direction.
Output Show Pool Output — The following table describes show pool output fields.
7710 SR OS Interface Configuration Guide
Temperature
Temperature threshold
Time of last boot
Current alarm state
Base MAC address
Values
access-ingress, access-egress
Values 1 — 2147483647
Values
ingress, egress
Label
Type
ID
Application/Type
Pool Name
Resv CBS
Utilization
State
Start-Avg
: 33C
: 75C
: 2007/04/11 15:13:48
: alarm cleared
: 04:7b:01:05:00:01
Specifies the pool type.
Specifies the card/mda or card/MDA/port designation.
Specifies the nature of usage the pool would be used for. The pools
could be used for access or network traffic at either ingress or egress.
Specifies the name of the pool being used.
Specifies the percentage of pool size reserved for CBS.
Specifies the type of the slope policy.
The administrative status of the port.
Specifies the percentage of the buffer utilized after which the drop
probability starts to rise above 0.
Interface Configuration
Description
Page 333