Aps Show Commands - Alcatel-Lucent 7710 SR OS Interface Configuration Manual

APS Show Commands

aps
Syntax aps [aps-id] [detail]
Context show
Description
This command displays Automated Protection Switching (APS) information.
Parameters aps-id — Displays information for the specified APS group ID.
detail — Displays detailed APS information.
Output APS Output — The following table describes APS output fields.
7710 SR OS Interface Configuration Guide
Values
aps-group-id
aps:
group-id: 1 — 128
Label
Interface
Admin State
Oper State
MC-CTL State
Work Circuit
Prot Circuit
Active Circuit
Tx/Rx K1 Byte
Group Id
Protection Cir-
cuit
Switching-mode
keyword
Specifies the APS interface name (the APS group port).
Up — APS is administratively up.
Down — APS port is administratively down.
Up — APS port is operationally up.
Down — APS is operationally down.
Specifies the multi-chassis state.
Specifies the working circuit ID.
Specifies the physical port that acts as the protection circuit for this
APS group.
Specifies the active circuit.
Displays the value of the SONET/SDH K1 byte received or transmitted
on the protection circuit.
Displays the APS group name.
Displays the physical port that will act as the protection circuit for this
APS group.
Displays the switching mode.
Interface Configuration
Description
Page 337