Table 10: Mac Match Criteria Frame Type Dependencies; Table 11: Default Service Ingress Policy Id 1 Definition - Alcatel-Lucent 7950 Quality Of Service Manual

Table 10: MAC Match Criteria Frame Type Dependencies

Frame For- Source
mat MAC
802dot3 Yes
802dot2-llc Yes
802dot2-snap Yes
ethernet-II Yes
a. When a SNAP header is present, the LLC header is always set to AA-AA
Service ingress QoS policy ID 1 is reserved for the default service ingress policy. The default
policy cannot be deleted or changed.
The default service ingress policy is implicitly applied to all SAPs which do not explicitly have
another service ingress policy assigned. The characteristics of the default policy are listed in
Table 11.

Table 11: Default Service Ingress Policy ID 1 Definition

Characteristic
Queues Queue 1
Queue 11
Flows Default Forwarding
Class
7950 XRS Quality of Service Guide
Dest IEEE
MAC 802.1p
Value
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Item
1 (one) queue all unicast traffic:
• Forward Class: best-effort (be)
• CIR = 0
• PIR = max (line rate)
• MBS, CBS and HP Only = default (values derived from applica-
ble policy)
1 (one) queue for all multipoint traffic:
• CIR = 0
• PIR = max (line rate)
• MBS, CBS and HP Only = default (values derived from applica-
ble policy)
1 (one) flow defined for all traffic:
• All traffic mapped to best-effort (be) with a low priority
Etype LLC Header
Value SSAP/DSAP
Value/Mask
No No
No Yes
No a
No
Yes No
Definition
QoS Policies
SNAP-OUI SNAP-
Zero/Non-zero PID Value
Value
No
No
Yes Yes
No
Page 43
No
No
No