Ariens 892025 Owner/Operator And Parts Manual page 14

Install Belt Cover (Figure 13 and 14)
NOTE: On 44-Inch mower decks, remove the portion of
the belt cover that is indicated in figure 13.
NOTE: There are four holes in belt cover (item 7) for the
different mower decks. See figure 13 for hole locations.
Hole for
Hole for
48-Inch
44-Inch
Mower
Mower
Decks
Decks
Remove This Part of the
Belt Cover for 44-Inch
Mower Decks
Item
7 Belt Cover
7
Description
Figure 13
1
OEe030
Item
1 Blower Assembly
2 Wing Knob
3 3/8" x 1-1/2" x 1/16"
Washer
4 3/8" x 3/4" Hex Bolt
1. Install cover spacer (item 11) on front belt cover
bolt.
2. Install belt cover (item 7) on blower assembly bolt
with two 3/8" x 1-1/2" x 1/16" washers (item 3) and
wing knob (item 2).
3. Install belt cover (item 7) on cover spacer (item 11)
with 7/16" x 1" x 5/64" flat washer (item 6), 3/8" lock
washer (item 5), and 3/8" x 3/4" hex bolt (item 4).
14
2
3
7
3
Description Item
5
6
7
11
Figure 14
4
5
6
11
Front Belt
Cover Bolt
OEe025
Description
3/8" Lock Washer
7/16" x 1" x 5/64"
Flat Washer
Belt Cover
Cover Spacer