Ariens 892025 Owner/Operator And Parts Manual page 11

INSTALL SHEAVE AND SHEAVE ADAPTER
(FIGURES 6, 7, AND 8)
WARNING: Keep discharge chute and
mounting hardware for re-installation when the
bagger kit is removed.
1. Remove mounting hardware and discharge chute
from unit (figure 6).
Mounting
Hardware
WARNING: Keep mounting hardware and right
belt cover for re-installation when the bagger kit
is removed.
2. Remove mounting hardware and right belt cover
from mower deck (figure 7).
Mounting
Hardware
Right Mower
Deck Spindle
Discharge
Chute
Figure 6
Right Belt
Cover
Hex Bolt
Washer
Figure 7
IMPORTANT: Keep the hex bolt for re-installation when
the bagger kit is removed.
NOTE: The washer is used for installing the sheave
(item 9) and sheave adapter (item 10) in step 4.
3. Remove hex bolt and washer from right mower
deck spindle.
NOTE: There are two sheaves (item 9) supplied with the
bagger kit:
• 44-inch mower decks use the 3-inch sheave
(p/n 00169500).
• 48-inch mower decks use the 4-inch sheave
(p/n 00169600).
4. Install sheave adapter (item 10), sheave (item 9),
and washer on right mower deck spindle with 3/8" x
1-3/4" hex bolt (item 8).
Washer
OEe015
Right Mower
Deck Spindle
Item Description
8 3/8" x 1-3/4" Hex
Bolt
9 Sheave
OEe020
11
8
9
10
Item Description
10 Sheave Adapter
Figure 8
OEe016