Faxing
Changing the fax resolution
1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
> Fax >
> enter the needed information >
3
Adjust the Resolution setting.
4
Fax the document.
Adjusting the fax darkness
1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
> Fax >
> enter the needed information >
3
Adjust the Darkness setting.
4
Send the fax job.
Viewing a fax log
Note: You may need administrative rights to view the fax logs.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Reports > Fax.
3
Click Fax Job Log or Fax Call Log.
Blocking junk faxes
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Fax > Analog Fax Setup > Fax Receive Settings > Admin Controls.
3
Select Block No Name Fax.
4
Apply the changes.
38