BEA LZR-WIDESCAN Quick Start Manual

QUICK START GUIDE
!
READ BEFORE BEGINNING INSTALLATION & SET-UP
Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 | General Tech Questions: Tech_Services@beainc.com | Tech Docs: www.BEAinc.com
LZR
®
Motion, Presence, and Safety Sensor
for Industrial Doors
DESCRIPTION
1
2
3
4
5
1. main connector
2. protection film
3. laser window 9. LCD screen
4. USB cap 10. keypad
5. LED display 11. tilt angle adjustment screw (1)
6. cover 12. parallel angle adjustment screw (2)
7. cover lock 13. lateral angle lock screw (1)
8. cable passage 14. mounting bracket
75.5916.01 LZR-WIDESCAN 20170918 75.5916.01 LZR-WIDESCAN 20170918 75.5916.01 LZR-WIDESCAN 20170918 75.5916.01 LZR-WIDESCAN 20170918
Refer to the user's guide
for safety instructions and
supplemental information.
1
OPENING THE SENSOR
Make sure the cover is not locked (red cover lock).
Pull the two legs on top in order to open the cover.
2
ADJUST SETTINGS (IF NEEDED)
a. Adjust the sensor before mounting for easier access to the LCD screen.
b. Adjust the function and logic of the outputs only if required by your application.
c. Open the USB cap and power the sensor using a mini USB charger or battery.
Adjustments may also be made after Teach-In, if not using the USB.
Ex:
Quick Start
In-Out
Motion
75.5917.02 LZR-WIDESCAN QSG 20171220 75.5917.02 LZR-WIDESCAN QSG 20171220
-WIDESCAN
(US version)
6
7
8
9
10
11
12
13
14
Page 1 of 15 Page 1 of 15 Page 1 of 15 Page 1 of 15
Do not remove the protection
film during the mechanical
adjustments.
before launching a teach-in.
OUT 1
Motion detection or
I/O
Out1Function
presence detection
Motion or PC
in pull cord zone
Out1Logic
I/O
Out1Logic Normally open
NO
Out2Function
LZR-WIDESCAN
Motion, Presence, and Safety Sensor
for Industrial Doors
Remove it
OUT 2
Presence detection
Out2Logic
Out 2 Function
of object in presence
Pres or Sfty
or safety field
Out 2 Logic
Out2Logic
Normally closed
NC
RelFunction
(US version)
Following installation, always
test for proper operation
before leaving the premises.
Completely remove the cover
before installing the sensor.
RELAY
Out 2 Logic
Detection of object
RelayFunction
HeightTrigger
if height > 7 ft 4 in
RelayLogic
De-energized
RelayLogic
De-energized
in no detection
>More
!
Page 1 of 4 Page 1 of 4