Removing A 2.4-Ghz Radio - Cisco AIR-MP20B User Manual

Removing a 2.4-GHz Radio

Follow these steps to remove a 2.4-GHz radio card from your access point.
Caution ESD can damage the internal access point components and the
2.4-GHz radio if they are not handled properly.
Caution
Do not use long-nose pliers or similar tools. To avoid damaging
the antenna wire assemblies, handle them by their connectors.
Caution Do not pull the antenna wire to remove the connector from the
radio card. Damage to the wire and connector will result.
1. Use your fingers to carefully remove the antenna wire connectors from
the 2.4-GHz radio card.
20