Configuring The 802.11G Radio; 1200 Series Installation Instructions - Cisco AIR-MP20B User Manual

3. Use a Philips screwdriver to hand tighten the cover's retaining screw.
4. Remove the backing paper from the 1100 series access point product
compliance label and carefully place the label over the existing label.

Configuring the 802.11g Radio

Refer to the following documents to configure the 802.11g radio:
• Cisco Aironet 1100 Series Access Point Hardware Installation Guide
•
Cisco IOS Software Configuration Guide for Cisco Aironet Access
Points
These documents are available at Cisco.com. Follow the links on page 4 to
access them.

1200 Series Installation Instructions

Note
Before installing your 802.11g radio, make sure that you upgrade to
Cisco IOS Release 12.2(13)JA or later. If you do not upgrade, the
access point will continually reboot.
14