Control Terminal - BenQ LH770 User Manual

Control terminal

y MONITOR OUT
Connects to other display devices used for simultaneous playback and display.
y PC 1/PC 2
This indicates the RGB or YPbPr/YCbCr output signal.
y S-VIDEO
Connecting S-Video source.
y HDMI 1
Connecting HDMI source.
y HDMI 2/MHL
Connecting HDMI or MHL source.
y LAN
Connecting to RJ45 Cat5/Cat6 Ethernet cable to control the projector via Internet.
y USB 1.5A
Supporting 5V/1.5A output.
y VIDEO
Connecting Video source.
y MiNi-B
This is the port for maintenance only. Only authorized maintenance personnel are allowed to use this
port.
y RS-232
This is a standard 9-pin D-sub connector. It is used for connecting to the PC to control the system
and maintain the projector.
y AUDIO IN (L/R)
Connecting to the audio input source via the audio cable or audio L/R cable.
y AUDIO OUT
Connecting to the loudspeaker or earphone.
y AUDIO IN
Connecting to the audio input source via the audio cable.
y 12V TRIGGER
This is the 12V trigger outlet. It is used to trigger external devices such as the electric screen. Consult
your dealer for the way to connect to these devices.
14