Press the lens shift button for adjustment
You can use the lens shift function to adjust the location of projected image horizontally or vertically in
the range described below.
Adjust the location of vertical image
You can adjust the height of vertical image between the shift locations 124.5% +/-7.8% (XGA), 125.7%
+/-7.9% (1080P).
Adjust the location of horizontal image
You can adjust the height of horizontal image between the shift locations 0% +/-6.3% (XGA), 0% +/-4.8%
(1080P).
Note:
A 3-percent tolerance exists for the lens shift.
Horizontal lens shift
adjustment bar
Vertical lens shift
adjustment bar
21