Remote Controller - BenQ LH770 User Manual

Remote controller

1. ON/ OFF
Toggles the projector between standby mode
and on.
2. Source selection button
Select the input source displayed.
3. Keystone/Arrow keys (
Down)
Manually corrects distorted images resulting
from an angled projection.
4. MENU/EXIT
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and
saves menu settings.
5. ◄ Left/
Turn down the projector volume.
6. ECO BLANK
Used to hide the screen picture.
7. LASER
Emits visible laser pointer light for
presentation purposes.
8. MHL control buttons
These buttons are used when playing the
media. Their functions are listed by order:
Go to the previous document/Play/Pause/Go
to the next document/Fast rewind/Stop/Fast
forward.
These buttons can only be used when
controlling the intelligent device in MHL
mode.
9. ZOOM+/ZOOM-
Magnifies or reduces the projected picture
size.
10. ASPECT
Selects the display aspect ratio.
11. FREEZE
Freezes the projected image.
12. NETWORK SETTING
Displays Network Settings menu.
13. Number keys
Enter numbers in Network Settings.
14. NETWORK
It is not available in this projector.
/ ▲ Up, / ▼
15. AUTO
Automatically determines the best picture
timings for the displayed image.
If no OSD menu is available and you're in
the MHL signal source mode, long-press this
button for 3 seconds to switch between the
MHL and DLP modes on the MHL key of
remote control.
Don't press the numeric buttons 1, 2,
3 and 4 when being asked to enter the
password.
15