Correcting 2D Keystone - BenQ LH770 User Manual

Correcting 2D keystone

2D Keystone function enables a wider projector installation area compared to conventional projectors
with limited positioning in front of the screen.
To correct this, you will need to manually correct it following one of these steps.
y Using the projector or remote control
Press / to display the 2D Keystone page.
Press ▲/▼ to adjust vertical values from -30 to 30. Press ◄/► to adjust
horizontal values from -30 to 30.
y Using the menus
1. Press MENU/EXIT and then press ◄/► until the
DISPLAY menu is highlighted.
2. Press ▼ to highlight 2D Keystone and press MODE/
ENTER. The 2D Keystone page displays.
3. Press ▲, ▼, ◄, ► to adjust the keystone values.
y Using QUICK INSTALL key
1. Press QUICK INSTALL on the remote control.
2. Press ▼ to highlight 2D Keystone and press MODE/
ENTER. The 2D Keystone page displays.
3. Press ▲, ▼, ◄, ► to adjust the keystone values.
2D Keystone
Display
Wall Color
Aspect Ratio
2D Keystone
Corner Fit
Position
Phase
H. Size
Digital Zoom
3D
S-VIDEO
Quick Install
Projector Installation
Test screen
2D Keystone
Corner Fit
MENU EXIT
OFF
Auto
ENTER
MENU EXIT
ENTER
MENU EXIT
29