Cleaning - Custom Audio Electronics TG2480H User Manual

6.3 Cleaning

For periodic cleaning of the device, see the instructions below
Rollers
1
Disconnect the power supply cable and
open the device (see previous paragraphs).
2
ISOPROPYL ALCOHOL
Clean the printing roller by using
a non-abrasive cloth moistened with isopropyl.
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the device.
Paper path
1
2
ON
Disconnect the power supply cable and
open the device (see previous paragraphs).
Remove any scraps of paper and the
accumulated paper dust on the rubber roller and in
areas near to the paper presence sensor.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the device.
Alcohol, solvent
ON
59