WLAN IP Telephony Handset Users Guide
Handset display
There are three areas to the WLAN Handset display:
Status area
Information area
Feature options area
The following figure shows an example of the WLAN Handset display.
Status area
Information Text
Feature Options area
Status area
The status area displays the handset status. It can include:
status indicators (see the table below)
left and right arrows
a series of dots representing the line keys, which change to a number
when active
No Service
Melody
Information area
The Information area shows:
the extension number of the handset
a line for general information
features and call information when the handset is in use
16
You are outside the coverage area and cannot receive or place
calls. An audible alarm also sounds. Return to the coverage area to
re-establish the connection.
Your battery pack charge is low. An audible beep also sounds.
Replace your battery pack within two minutes.
You have a new voicemail message.
A melody is played when the WLAN Handset is turned on for the
first time following a completed charge.
5
Ftre
NN40011-039 Issue 1.2 BCM Rls 6.0