Mercedes-Benz 603 Service Manual page 77

Front hex. head bolt (116)
Holder (62)
Hex. head bolts (417)
Holder for TDC sensor (42 or 44)
Model 201 (up to 03185):
Mount (6) for engine stop
Model 201 (up to 03185):
Engine shock absorber (24) left .
Model 126:
Engine shock absorbers (24) left and right . . . . .
Front suspension eye on engine . . . . . . . . . . . . .
Engine mounts (28), front, left and right
01.10 - 21012
for fuel filter, remove, reinstall, 25 Nm
(item 2).
for oil dipstick tube, remove, reinstall, 25 Nm
(item 3).
on mount (416) for alternator, remove, reinstall
and remove mount, install, 45 or 25 Nm
(item 4).
mark position and unbolt, reinstall (item 5).
Note
Check TDC sensor adjustment, readjust if
required (03-345).
. . . . . . . . . . remove, reinstall, 25 Nm (item 6).
remove,
Note
Check engine stop, adjust, 130 Nm (22-220)
adjustment gauge 201 589 04 23 00.
remove, install, 10 Nm (item 8).
hook in engine hoist (item 9).
remove Allen bolts at bottom,
40 and 70 Nm (item 10).
install, 10 Nm (item 7).
reinstall,
EXIT