05-211
Checking and renewal of hydraulic valve clearance compensating
elements
185
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine oil level
Turbo engine:
Charge air pipe
Cylinder head cover
Valve tappet (203)
05 10 211 1
bring to operating temperature (80° C).
check.
Caution!
Do not overfill.
remove, install.
remove, install, 10 Nm.
check with a mandrel, to do this first check on
the cylinder which is exactly on Ignition TDC
(cam tips for inlet and exhaust valve pornt
upwards).
Caution!
Unnecessary rotation of the engrne causes the
valve clearance compensating elements to sink.
EXIT