Mercedes-Benz 603 Service Manual page 249

11
Remove lock washer for axial fixing (arrow)
and check condition.
12 Pull out valve tappet with magnetic lifter
102 589 03 40 00.
13 Check valve tappet for condition (visual
inspection), replace if necessary.
Caution!
Install valve tappet in the same position again.
Installation
14 Insert lock washer for axial fixing (arrow) in
cylinder head.
15
Lubricate camshaft and place on the cylinder
head so that the TDC marking (arrow) pornts
16 Install camshaft bearing caps. Note marking
on beanng caps.
0 5 1 0
EXIT