Receiver - RCA RV3693 User Manual

Appendix A: Connecting the Receiver
RCA DSS® Receiver
This connection provides
• stereo or surround sound from programs broadcast
in stereo
• stereo sound from the RCA DSS
To use this connection, you
must have
• (1) paired (red/white) stereo cable
• (1) single (yellow) video cable
• (2) coaxial cables
To Connect
1. Connect the cables as shown in the
diagram below.
Using This Connection
To watch TV programs in stereo
1. Press TV and tune to a channel.
To watch DSS programming
1. Press DSS•CABLE.
2. Tune to a channel.
3. Follow the instructions in the
®
RCA DSS User's Guide.
®

receiver.

Do not stack electronic components or other
objects on top of the DSS receiver. The slots
on top of the receiver must be left uncovered
to allow proper airflow to the unit. Blocking
the airflow to the unit could impair
performance or damage your receiver and
other components. Also, do not stack the DSS
receiver on top of a "hot component" such as
an audio power amplifier.
RCA DSS
RECEIVER
AUDIO
RECEIVER
TO TV S-VIDEO
IN FROM ANT
S-VIDEO
OUT TO TV
L R VIDEO
AUDIO
IN OUT VCR 2/ MONITOR
VCR 1 LD DSS
VCR 1 VCR 2/ DSS
IN OUT LD
L
R
L
R
AUDIO
IN
TV CD SOURCE TAPE/MD
SATELLITE DISH
CH3
CH4
SATELLITE
IN
VIDEO
OUT
AUDIO
1
AUDIO
2
SUB WOOFER
OUT
OUT (MONO)
40