RCA RV3693 User Manual page 21

Tour of the Receiver
SWAP AUDIO Swaps the audio only from the large picture to
the small picture when you are watching TV and using
picture-in-picture (PIP).
Surround Sound Level Controls
+
Increases the volume in rear and center speakers.
— Decreases the volume in rear and center speaker.
BY-PASS Turns on and off By-Pass mode, which cancels all
Surround sound modes. Sound is generated without effects.
REAR•CTR LEVEL Adjusts the balance level of the rear and
center speakers. Press once for Rear. Press again for Center.
Receiver/Tuner Controls
AUX If programmed, turns on another AM/FM brand and
puts the remote in AM/FM mode.
CHAN UP and DOWN Tunes the receiver to the next or
previous preset station stored in the receiver's memory.
FF Lets you manually move up the AM/FM band.
INPUT•SEEK Searches for and stops on AM/FM stations with
signals of sufficient strength.
MENU/PROGRAM Stores the selected station in the
receiver's memory.
Number Buttons Let you enter numbers when needed.
REW Lets you manually move down the AM/FM band.
TV Controls
+
On some RCA TV models, used to adjust menu controls.
— On some RCA TV models, used to adjust menu controls.
ANTENNA Changes the antenna input.
AUX If programmed, turns on another TV brand and puts the
remote in TV mode.
DELAY/CH CTRL In some RCA TV models, lets you control the
channel that appears in the PIP window.
CHAN UP and DOWN Tunes the TV channel up and down.
CLEAR Removes any menu from the screen.
DISPLAY Displays channel information.
You can program the remote to
operate many other brands of
audio and video components. See
Chapter 4, Programming the
Remote for details.
19