•
Phillips screwdriver
•
Hardware options
•
Operating system or application software
•
Keyboard
•
Mouse
•
External USB CD-ROM drive
•
External USB floppy drive
•
USB key
Installing a storage enclosure into the rack
To install the server into the rack:
Secure the front end of the rails to the rack.
1.
IMPORTANT:
the rails for use in round-hole racks. These load-bearing pins are designed to fit through the
holes without being removed.
IMPORTANT:
extend through the holes marked with the template.
NOTE:
Secure the back end of the rails to the rack.
2.
IMPORTANT:
extend through the holes marked with the template.
Do not remove the pins from the ends of the rack rails unless you are converting
Be sure that the scissor-type locking latches engage the rack fully when the pins
Identify the left (L) and right (R) rack rails by markings stamped into the sheet metal.
Be sure that the scissor-type locking latches engage the rack fully when the pins
Setup 23