Setup And Installation In A Rack; Rack Planning Resources; Installing The Storage System Into The Rack - HP ProLiant DL380 G3 with MSA1000 Setup And Installation Manual

Setup and Installation in a Rack

Perform the following procedures to set up the packaged cluster in a rack.
WARNING: To reduce the risk of personal injury or damage to the equipment,
at least two people are required to lift the components during installation or
removal.

Rack Planning Resources

The rack resource kit ships with Compaq or HP 7000-, 9000-, and 10,000-series
racks. For more information on the content of each resource, refer to the rack
Documentation CD.

Installing the Storage System into the Rack

The rack mounting hardware kit provides the required components for quick
deployment in Compaq branded, HP branded, and most square- and round-hole
third-party racks. The adjustable feature of the rack rails enables installation in racks
with depths of 69.90 to 73.81 cm (27.52 to 29.06 inches).
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
Setup and Installation of the Packaged Cluster
2-17