HP bt1300 User Manual page 35

2. Click on Select Printer (you will be prompted to place the hp bt1300 into configuration mode), and
then click on Next to continue.
NOTE: If security is enabled in the hp bt1300, you may be required to provide a passkey before a
connection is established. If a passkey is required, a passkey screen will appear, prompting you to enter
the appropriate passkey. After the correct passkey is entered, a connection is established, and Windows
will remember the successful authentication, making it unnecessary to re-enter the passkey for subsequent
connections. If an incorrect passkey is entered, the connection attempt will fail, and the utility will return to
its initial state. If the utility is unable to establish a connection with the print adapter, an error message will
be displayed, and the main window will default to its initial state. If you forgot your passkey, perform a cold
reset to restore the device to factory default conditions (no passkey) by removing power from the device,
and then reapplying power while simultaneously holding down the test button.
For Windows 98SE, ME, 2000 Operating Systems using a non-Microsoft Bluetooth Stack:
Select the COM port configured for the
Bluetooth Serial Port Profile (SPP) on the
host computer (refer to Appendix A for
setting up a virtual COM port), and then
click on Next. After a brief pause to
establish a connection, the General tab
screen will appear and display the name of
printer connected to the hp bt1300. Once a
connection is established with the printer
adapter, all controls are enabled, and the
current device settings are displayed. If
desired, the default printer name can be
changed to denote a specific printer (e.g.,
Dave's printer, sales desk printer, etc.). To
change the default printer name, type the
desired printer name over the existing name.
For Windows XP Operating Systems using the Microsoft Bluetooth Stack:
Select the printer you wish to use from the
displayed list, and then click on Connect.
After a brief pause to establish a connection,
the General tab screen will appear and
display the name of printer that is connected
to the hp bt1300. Once a connection is
established with the printer adapter, all
controls are enabled and the current device
settings are displayed. To change the
default printer name, type the desired printer
name over the existing name.
4- 4 Configuring Your Printer Adapter