Raymarine C90W Installation Manual page 29

Digital radar cables
You will need at least 2 cables to connect the digital radar scanner.
One cable connects the scanner to a SeaTalk
over coupler). The second cable then connects into the display.
Note: The maximum cable length including all extensions is 25 m
(82 ft).
Radar scanner to SeaTalk
Digital scanner cables
Connect the Radar scanner to the SeaTalk
power supply. These cables contain both power and data wires.
Cable Part number
5 m (16.4 ft) Digital cable A55076
10 m (32.8 ft) Digital A55077
cable
15 m (49.2 ft) Digital A55078
cable
25 m (82.0 ft) Digital A55079
cable
Extension cables
Use of one of these cables to extend the radar connection to the SeaTalk
(or cross over coupler) and power supply. These cables contain both power and
data wires.
Cables and connections
hs switch (or cross
hs switch (or cross over coupler)
hs switch (or cross over coupler) and
Notes
Your radar scanner may
include the 10 m cable
(depending upon the
model purchased)
Cable
2.5 m (8.2 ft) extension
cable
5 m (16.4 ft) extension
cable
10 m (32.8 ft) extension
cable
SeaTalk hs switch (or cross over coupler) to display unit
SeaTalk hs network cables
Connect from the SeaTalk
display.
Cable
1.5 m (4.9 ft) SeaTalk
network cable
5 m (16.4 ft) SeaTalk
network cable
10 m (32.8 ft) SeaTalk
network cable
20 m (65.6 ft) SeaTalk
network cable
SeaTalk hs hardware
hs switch
To connect the digital radar to the C-Series display you will need
to include one of the following
Part number
A92141
A55080
A55081
hs switch or the cross over coupler into the rear of the
Part number
hs E55049
hs E55050
E55051
hs
hs E55052
Notes
Notes
29