Raymarine C90W Installation Manual page 27

SeaTalk hs display to display cables
You can connect up to 2 C-Series Widescreen displays together
using SeaTalk hs . Connect the displays directly or use a SeaTalk
switch.
SeaTalk hs network cables
Connect from the SeaTalk hs switch into the rear of the display.
Cable Part number
1.5 m (4.9 ft) SeaTalk hs E55049
network cable
5 m (16.4 ft) SeaTalk hs E55050
network cable
E55051
10 m (32.8 ft) SeaTalk hs
network cable
20 m () SeaTalk hs E55052
network cable
Fully waterproof SeaTalk hs network cables
Connect directly from display to display.
Cable Part number
1.5 m (4.9 ft) Dual end A62245
SeaTalk hs network cable.
A62246
15 m (49.2 ft) Dual end
SeaTalk hs network cable
Cables and connections
Radar connection
C-Series Widescreen displays are compatible with Raymarine digital
hs radar scanners. The scanner is connected using a SeaTalk
The digital radar can be connected either directly to the C-Series
display or via a SeaTalk
Radar connected directly to the C-Series unit
Note: The connector on the free end of the radar cable does not
Notes
have a locking / weather tight mechanism. The use of a crossover
coupler is important to create a weather proof connection.
Notes
Cable has waterproof
connectors at both ends.
Cable has waterproof
connectors at both ends.
hs switch.
hs cable.
27