Panasonic KX-TDE100 Features Manual page 415

[Programming Examples of DID/DDI Table and DIL Table]
DID/DDI table can be programmed for each DID/DDI number, and a tenant (Time Table) number is
assigned to each DID/DDI number. DIL table can be programmed for each trunk, and a tenant (Time
Table) number is assigned to each trunk.
<DID/DDI Table>
Location
001
002
:
<DIL Table>
Trunk No.
01
02
:
Explanation:
If a trunk call with a DID number (123-4567) is received at 20:00;
1)
Tenant (Time Table) number 1 will be used.
2)
The call is received during night mode in Time Table 1.
3)
The call will be routed to the extension 100 (VPS).
4.
Holiday Mode
The holiday mode activates automatically using the Automatic Switching mode. Up to 24 holidays (start
and end dates) can be stored, and one time mode can be selected for all holidays.
5.
Time Service Button
A flexible button can be customised as the following buttons:
a)
Day/Night button
b)
Day/Night/Lunch button
c)
Day/Night/Break button
d)
Day/Night/Lunch/Break button
Each of these buttons is used for switching between modes. For example, pressing the Day/Night
button switches between day and night modes. All of these buttons show the current status as follows:
Light Pattern
Off
Red on
Green on
Slow green flashing
DID/DDI No. Tenant (Time
Table) No.
123-4567
123-2468
:
Tenant (Time Table) No.
1
2
:
Status
Day mode
Night mode
Lunch mode
Break mode
Day
1 105
1 102
: :
Day
101
102
:
2.2 System Configuration—Software
DID/DDI Destination
Lunch Break
100 (VPS) 105
100 (VPS) 102
: :
DIL Destination
Lunch Break
100 (VPS) 101
100 (VPS) 102
: :
Feature Guide
Night
100 (VPS)
100 (VPS)
:
Night
100 (VPS)
100 (VPS)
:
415