Ring Tone Pattern Selection - Panasonic KX-TDE100 Features Manual

1.1.3.2

Ring Tone Pattern Selection

Description
It is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,
etc.
[Ring Tone Patterns]
1 280 ms*
Single
Double
Triple
S-Double
*: The duration of a ring tone may vary by country/area.
[Ring Tone Pattern Table]
The ring tone pattern table is categorised into three parts, each containing a specified number of pattern
plans.
The ring tone pattern table is categorised as follows:
• Incoming Trunk Calls: each pattern plan can assign a ring tone pattern for each trunk group.
→ 2.8.15 [2-8-1] Ring Tone Patterns—Call from CO
• Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
→ 2.8.16 [2-8-2] Ring Tone Patterns—Call from Doorphone
• Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring
tones assigned to certain features (e.g., timed reminder).
→ 2.8.17 [2-8-3] Ring Tone Patterns—Call from Others
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
[Programming Example of Ring Tone Pattern Table]
Intercom
Table
Call/Hold
No.
Recall
1 Double
2 Single
: :
Conditions
• "PT Ring off Setting" can be enabled or disabled through system programming. If disabled, PT
users cannot turn incoming call ringing off for their extension.
Trunk Call/Hold
Recall
TRG1 TRG2 ... Port 1
Single Single
Double Double
: : :
Doorphone Call
Reminder
Port 2 ...
: : :
1.1 Incoming Call Features
Timed
Call Back
: :
External
LCS
Sensor
: :
Feature Guide 43